Zip Clip 'Luma-Lock' S For Spans 300-400mm 35kg SWL

Designed to suspend services from a single point suspension, the Luma-Lock works in conjunction with standard Zip-Clip suspensions to support from a variety of different base materials.

The Specifics:

The range consists of two pre-determined lengths of wire with heat treated toggles forming the termination points with a choice of Safe Working Loads.

G - 15kg SWL
S - 35kg SW

The Applications:

Suitable for primary and secondary support for suspending:
- Lighting Fittings
- Heat Panels
- Plenum Boxes
- Basket, Ladder and Tray

The Technical Information:

- Reduces the use of studding and channel
- One fixing point per drop
- Can be fixed to installation at ground level
- High tensile galvanised wire 1960N/mm² grade 7 x 7 construction
- BSEN 12385 Standard

The Installation:

- The attachment of the Luma-Lock system can be done at ground level
- Attach the two toggles through the rear of the system being suspended
- By inverting the toggle parallel to the wire the toggle will swing through 90 degrees
- Ensure hole is no larger than 12mm diameter
- Pass the free end of the wire from your top suspension through the zip-clip in the direction of the arrow
- Pass through the plastic protected loop of the Luma-Lock and back through the zip-clip allowing 15cm of wire protruding
- Legs should not exceed 60 degrees