216x30x40T ATB TCT Saw Blade Wood Medium/Fine Finish

Our comprehensive range of TCT Saw Blades are aimed to suit most professional makes of circular saws, mitresaws and bench saws.
If the bore size shown below is not the size for your particular saw, normally the use of reducing washers to the correct size will enable the blade to be used. (Please order reducing washers separately)

Blade Variations
These quality blades feature an alternate top bevel (ATB) tooth configuration for the professional tradesman.

Less Teeth:
- Preferred for ripping along the grain of hard and soft wood and other wood based materials
- Coarser finish
- Faster feed rate

More teeth:
- Preferred for cutting across grain of hard and soft wood
- Finer finish
- Slower feed rate

Suitable for:
- Softwood
- MDF
- Hardwood
- Hardboard
- Particle Board
- Plywood
ATB Tooth - suitable for most applications including rip saws and table saws
ATB Neg Tooth - suitable for use on mitre saws and chop saws.
Minimises snatching and pick up of material.
ATB 30? Tooth - suitable for laminate material to reduce damage to the surface.
Fast cut.
TCG Tooth - suitable for materials such as aluminium, plastic, wood laminates and other manmade materials.
Leaves a chip-free finish due to its bevelled corner tooth which cuts first followed by a flat top tooth.